Cu粉粒径及含量对Ni/MH电池负极放电性能的影响

为了提高Ni/MH电池中储氢电极的放电性能,以电解Cu粉为充填材料与活性物质混合制备电极,研究Cu粉粒径及含量对电极性能的影响。研究发现,Cu粉粒径越小,含量越高,电极的放电容量、高倍率放电性能、及在低温和高温下的放电能力均提高,且Cu充填电极的性能优于Ni充填电极。Cu充填电极中析氢反应的交换电流密度较大,过电势较小,说明其电催化活性好,电极反应阻力小。SEM分析发现,充放电循环后的Cu充填电极,其储氢合金颗粒表面覆盖着一层细小Cu颗粒和丝状物,这是电极性能提高的主要原因。     

On the exponentially weighted moving variance

MacGregor and Harris (J Quality Technol 25 (1993) 106–118) proposed the exponentially weighted mean squared deviation (EWMS) and the exponentially weighted moving variance (EWMV) charts as ways of monitoring process variability. These two charts are particularly useful for individual observations where no estimate of variability is available from replicates. However, the control charts derived by using the approximate distributions of the EWMS and EWMV statistics are difficult to interpret in terms of the average run length (ARL). Furthermore, both control charting schemes are biased procedures. In this article, we propose two new control charts by applying a normal approximation to the distributions of the logarithms of the weighted sum of chi squared random variables, which are respectively functions of the EWMS and EWMV statistics. These new control charts are easy to interpret in terms of the ARL. On the basis of the simulation studies, we demonstrate that the proposed charts are superior to the EWMS and EWMV charts and they both are nearly unbiased for the commonly used smoothing constants. We also compare the performance of the proposed charts with that of the change point (CP) CUSUM chart of Acosta‐Mejia (1995). The design of the proposed control charts is discussed. An example is also given to illustrate the applicability of the proposed control charts. © 2009 Wiley Periodicals, Inc. Naval Research Logistics, 2009     

中国维和警察特色理论研究

中国维和警察特色理论是中国维和警察学科理论体系基本框架的重要组成部分。对中国维和警察特色理论的概念、主体、特征、范畴进行了探讨，以构建中国维和警察特色理论的基本框架，为中国维和警察学科理论体系研究奠定坚实基础。     

人工神经网络特征优化方法在模式识别中的应用

在模式识别中,特征量的选择及组合优化是设计模式识别系统的关键问题,它强烈地影响到分类器的设计及其性能。人工神经网络除了在模式识别中作为分类器应用之外,而且能够实现特征参数的提取。通过采用人工神经网络模型,对柴油机故障的特征量优化方法进行了研究,实现了对柴油机故障的特征提取及优化。     

面内阶跃载荷下薄板弹性动力屈曲差分解

根据薄板微元的动力平衡分析导出薄板动力屈曲控制方程,由屈曲瞬间能量转换率守恒条件得出一个压缩波前屈曲变形的附加约束方程,由此得到求解薄板动力屈曲问题的完备定解条件.以受载边夹支的薄板为倒,利用有限差分法得出了薄板前三阶动力屈曲模态和相应的两个特征参数值,并对比分析了薄板静、动力屈曲的差别.分析表明,薄板动力屈曲过程中产生屈曲动能,比静力屈曲要吸收更多的外部能量.     

基于目标结构特征像的SVM目标识别方法

针对支持向量(SVM)对目标高分辨一维距离像(HRRP)识别率和稳定性不高的问题,研究将目标分解理论推广应用于对目标极化散射矩阵的分解,求得了目标结构特征像.在分析研究SVM的训练和测试方法的基础上,采用SVM通过结构特征像对两实验目标进行分类识别,结果表明,基于目标结构特征像的SVM目标识别方法能够提高目标正确识别率,且其稳定性较好.该方法是一种有效的目标识别方法.     

混响室工作模式对辐射敏感度测试结果的影响

针对国内外标准中对混响室连续模式辐射敏感度测试方法的缺失,构建了混响室中辐射敏感度测试系统。通过对三种不同军用医疗设备进行试验研究,总结出一套重复性强的混响室连续模式辐射敏感度测试方法。将混响室两种工作模式测试结果进行对比,发现无论连续搅拌采用哪种搅拌速度,对于不同的受试设备,其测试结果均低于步进搅拌模式。     

Performance and properties of Q‐Statistic monitoring schemes

In this article, we study the Shewhart chart of Q statistics proposed for the detection of process mean shifts in start‐up processes and short runs. Exact expressions for the run‐length distribution of this chart are derived and evaluated using an efficient computational procedure. The procedure can be considerably faster than using direct simulation. We extend our work to analyze the practice of requiring multiple signals from the chart before responding, a practice sometimes followed with Shewhart charts. The results show that waiting to receive multiple signals severely reduces the probability of quickly detecting shifts in certain cases, and therefore may be considered a risky practice. Operational guidelines for practitioners implementing the chart are discussed. © 2009 Wiley Periodicals, Inc. Naval Research Logistics, 2009     

用Excel演示Floyd算法

Floyd算法是计算最短路径长度的基本算法之一,若用Excel实现,算法的核心部分只需填写一个公式,比通常的四重循环结构算法简单、直观。     

空投设备缓冲气囊的优化设计

简述了气囊缓冲的机理及工作过程,建立了气囊缓冲过程的理论分析模型及气囊参数优化数学模型。利用ISIGHT建立气囊优化模型,选择遗传算法对空投设备缓冲气囊的主辅气囊排气孔面积、气囊高度和主辅气囊体积比进行优化。优化后的结果对空投试验具有很好的指导意义,可减少气囊设计试验次数从而降低试验成本。